Zeiss Axio Vert.A1 FL Inverted Transmitted Light Microscope Lab

Description Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: • 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) • Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination • Reflector modules: DAPI, FITC, TRITC, empty • 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) • Position 1: empty • Position 2: 424228-9060 0.05T Neutral density filter 0.05 • Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 • Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 • Position 5: empty • 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) • 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) • 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 • 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) • 1 x Camera adapter 60N-C 2/3" 0.5x (426112) • 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) • 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) • Object guide M, 130x85mm, for Axio Vert (432333-9040-000) • 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation