Palm Microbeam3 Laser Capture Microdissector, Axiovert 200 w/ AxioVision Lab

Description Palm Microbeam3 Laser Capture Microdissector with Zeiss Axiovert 200 Microscope This system was removed from a university laboratory where it was surplus to requirements. The previous owner stated that the system was in working prior to decommissioning. We recommend that it be re-commissioned by a Zeiss engineer before it is used again. The system comprises the following: • 1 x Zeiss Axiovert 200 Manual Inverted Microscope, fitted with: • 1 x Zeiss HAL 100 Halogen Lamp • 1 x Zeiss 1005-847 6-Position Condenser (H, Ph1, Ph2, Ph3, DIC, DIC) • 1 x Zeiss Cap Mover • 1 x Palm ST2-568-B Automated Stage (software-controlled) with 3x1.0 slide holder • 1 x 6-Position Nosepiece fitted with objectives: • Zeiss Fluar/Palm 5x/0.25 ∞/0.17 • Zeiss Fluar/Palm 20x/0.75 ∞/0.17 • Zeiss Plan-NEOFLUAR/Palm 100x/1.30 Oil ∞/0.17 • 1 x Zeiss 1005-827 Binocular Tube 45º/23 with pair of Carl Zeiss 1016-758 W-PI 10x/23 Eyepieces • 1 x Zeiss 1064-364 5-Position Reflector Turret fitted with Laser, FITC, Rhod, and 2 empty positions • 1 x Zeiss AxioCam ICc1 Camera • Illumination and Accessories: • 1 x Zeiss HBO100 Mercury Lamp with EQB100 PSU • 1 x Ludl Filter Wheel FW 6 POS W/SH with Ludl MAC5000 Power Base • Laser Capture Components: • 1 x Palm Microbeam 3 System • 1 x Palm Joystick Controller • 1 x Palm Footswitch • 1 x Zeiss CryLas Laser Controller • 1 x Zeiss System Control Box • Control & Software: • 1 x HP Z800 PC running Windows 7, pre-installed with: • Zeiss AxioVision 4.8.2 • Zeiss licence dongle included • Keyboard, monitor, and mouse included • Additional Items: • Original Zeiss AxioVision software disc • Assorted manuals and spare parts • All necessary connection cables